CALL NOW: +1 888-771-4769
The G8LED 90W Red Flower Booster is a supplemental flower enhancing light that can be added to any flowering room. Within a few days of adding this light next to your G8LED Veg/Flower light, there will be a noticeable increase in flowering. The PAR Value of the Flower Booster is 920μMol/s. The Flower Booster increases flowering size, density, and overall yield. Flower Boosters can be added alongside any LED, HPS, MH, Plasma or Fluorescent lighting during the flowering cycle and provide coverage for a 3foot (91cm) diameter. The hanging distance for the Flower Booster is at the same level as the Veg/Flower light. This light can also be placed vertically or angled towards the plants. The Flower Booster is a great investment for every grow room.
G8LED lights come with our stellar Customer Service, which is the best in the industry. We have been providing excellent service to our customers for over 8 years. We make customer service our #1 priority and get a large portion of our business from repeat customers and referrals. Make the smart investment for your grow room with a high quality G8LED indoor grow light.
Worldwide power cords are available based on the country of your shipping address. Hanging wires are included and no ballast is needed. Just plug in and grow. Upgrade your grow room and Grow Green with G8LED Technology! Contact us with any questions.
i bought an all red 90w but thought it was a scam. half way thru the 2nd grow i noticed the buds under the ufo were almost twice as big as the others. i have 4 plants under a g8 450. the ufo was placed where 2 plants got most of the light.when i noticed the difference i put the ufo more to the middle. am half way thru the flower cycle. i would say 1 ufo would cover a 3x3 area.
Four 90W Reds added on to my two 900W lights and I saw the difference by the next morning. I love my grow setup.
I have been using the 90w for a cpl of months and had an issue with the light.I emailed them on a Sunday and had a reply that day with a return label,here it is Wednesday and i already have the new light.They sent me a new one before my return made it back to them,That my friend is customer service, Thanks G8.And by the way the light really ups the yield of my setup.
better than an HPS, and healthier on the plants, and no heat like an HPS. My buds started swelling after just a few hours. UFO has 90 1w chips. This light is bright. Has lots of PAR f/ photosynthesis. The majority of the LEDs have a peak of 660nm. This is the important spectrum f/ flowering but this UFO has some is 630nm also f/ flowering and tight internodes f/ more bud sets and no stretching. I have only seen one other bloom booster UFOs w/ both important spectrums, and it was over $200. I recommend this light if you are serious. LEDs are USA made. You can use this light to supplement your primary light, buts seems to work well on it's own too., I will get another. Its effective. Easily hang 12" above canapy works well.
they were right! i did my first grow without adding this during flowering and the yield was ok but i got 2 of these for my g8-450 and the yield was almost twice as much - awesome! only one was recommended but i decided to add two of these puppies in my tent since i had plenty of space.
i have been using the G8 system for almost 2 years now. started with the G8-600 and expanded my warehouse with more of these and G8-900 lights. the 90 red ufo made all the difference in getting top yield. i am now able to get more with this system than i did with my 1000w hps system, all the while not having to deal with the excess heat and my electrical bill hasn't gone up even though i have more than doubled my grow in my warehouse.
i have the G8-900 set up in a 72" x 60" grow area and the performance was already phenomenal. i added 2 of the Red UFOs like recommended and WOW - what a difference. the next day i saw that plants had reacted well to the supplemental light. these flower boosters are just that - BOOSTERs! i have the sweetest trichome formation and hefty buds. Awesome system!
|Input Voltage / Amperage||110V @ 0.6Amp | 240V @ 0.3Amp|
|Net Weight||3.5 lbs (1.6kg)|
|Dimensions||10.5”diameter x2.25”high (26.7x5.7cm)|
|PAR Value (μMol/s)||920|
|Coverage Area||1 per 10square feet (0.93m sq.) when used with any G8LED panel|
|Return Period||90-Day Money Back|